| AMI MUCFCF207-20NPRF Mounted Units & Inserts | D:9 mm; Da max.:8 mm; d2 ≈:4.35 mm; da max.:4.3 mm; d:3 mm; B:5 mm; Basic static load rating C0:0.095 kN; D2 ≈:7.9 mm; Reference speed:140000 r/min; Calculation factor kr:0.03; |
| AMI UCHPL207-22MZ2W Hanger Unit Bearings | with tapered bore:2 800 min-1; with cylindrical bore:2 200 min-1; Pu:443 kN; Static (Cor):8.3 mm; D:170 mm; Dynamic (Cr):4.5 mm; rs (min):2.1 mm; B:58 mm; Grease:551 kN; d:80 mm; |
| AMI MUCWTPL208B Take Up Unit Bearings | Preload class A GA:200 N; ra max.:1 mm; Static axial stiffness, preload class C:311 N/µm; Basic dynamic load rating C:22.5 kN; Static axial stiffness, preload class B:238 N/µm; d:70 mm; Calculation factor f2A:1; db min.:76 mm; D1:95.32 mm; Calculation factor f:1.09; |
| AMI UELC205 Cartridge Unit Bearings | D:130.0000 mm; Accessories:Without Accessories; d:60.000 mm; B:31.00 mm; Basic Dynamic Radial Load Rating C:91300 N; Oil Speed Rating Open/Shielded n2:5300 rpm; Basic Static Radial Load Rating Co:78000 N; Grease Speed Rating Open/Shielded n1:4300 rpm; Fillet Radius ra:2.00 mm; |
| AMI UKPU310+HA2310 Pillow Block Bearings | Distance J:3.5000 in; Dimension H1:1.9375 in; Dimension L:4.7500 in; Weight W:2.00 lb; Basic Dynamic Radial Load Rating:5550 lbf; Insert Bearing IB:Stainless Steel; Height H:4.1250 in; Width A:1.8750 in; Shaft Diameter D:1 1/2 in; Dimension S1:1.1875 in; |
| AMI UGAK212-36 Pillow Block Bearings | B:45.00 mm; d:95.000 mm; Basic Dynamic Radial Load Rating C:153000 N; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:One Seal; Sealed Speed Rating n3:2200 rpm; D:200.0000 mm; Basic Static Radial Load Rating Co:118000 N; Grease Speed Rating n1:3200 rpm; |
| AMI UEWTPL205-16CB Mounted Units & Inserts | Calculation factor Y1:3.2; Mass bearing:2455 kg; Fatigue load limit Pu:2500 kN; ra max.:6 mm; B:400 mm; D1 ≈:1589 mm; Calculation factor Y2:4.8; K:12 mm; Da max.:1692 mm; D:1720 mm; |
| AMI UCT208-25NP Take Up Unit Bearings | Oil Speed Rating n2:10000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:34100 N; Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:7500 rpm; Accessories:Shield & Seal; D:62.0000 mm; Basic Static Radial Load Rating Co:30500 N; Fillet Radius ra:1.00 mm; B:25.40 mm; |
| AMI MUCST207-21NPRF Mounted Units & Inserts | PG:1/8 NPT; Stabilizing ring:SR-15-0; A2:120.65 mm; End plug (suffix Y):EPR 8; Ca:37.008 mm; Mass pillow block:14.5 kg; Cap bolt:2 x 1/2-13 UNC; Lock nut:AN 15; Bearing limiting speed:6300 r/min; Cap bolt recommended tightening torque:149.1 N·m; |
| AMI UKFLX06+HS2306 Mounted Units & Inserts | PG:1/4 NPT; Cap bolt, SAE grade:8; P90°:113 kN; Adapter sleeve assembly:SNW 3032x5.7/16; Appropriate attachment bolt size G:0.875 in; Pa:25.4 kN; H1:152.4 mm; L:466.725 mm; End plug (suffix Y):EPR 16; Bearing:23032 CCK/W33; |
| AMI UCMST201-8MZ20 Mounted Units & Inserts | Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; B1:4 mm; α:105 °; d:18 mm; D1:32 mm; Tolerance housing:H7; B:16 mm; Tolerance shaft:e7; a:3 mm; |
| AMI UCST207TC Mounted Units & Inserts | Accessories:Two Shields & Snap-R; Sealed Speed Rating n3:3600 rpm; Basic Static Radial Load Rating Co:40500 N; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:55900 N; Grease Speed Rating Open/Shielded n1:5300 rpm; D:120.0000 mm; d:65.000 mm; Grease Speed Rating n1:5300 rpm; Fillet Radius ra:1.50 mm; |