| KAWASAKI 705-41-08080 PC Excavator Series Pump | row type & fill slot:Single Row Non-Fill; outer ring width:16 mm; closure type:Double Sealed; internal clearance:C0; dynamic load capacity:4800 lb; D:62 mm; application:Agriculture; series:200; B:24 mm; d:1.0000 in; |
| KAWASAKI 705-56-34360 PC Excavator Series Pump | Mass bushing:0.59 kg; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; d:60 mm; Tolerance shaft:h8; Tolerance housing:H7; Coefficient of friction µ min.:0.05; D:75 mm; |
| KAWASAKI 705-56-34290 PC Excavator Series Pump | Clearance:C2; Cage Type:Steel; SKU:23056-e1-c2-fag; Limiting Speed Rating (r/min):1960; d:280mm; Seals or Shields:Open Type; Weight:0.02 KGS; Reference Speed Rating (r/min):1100; D:420mm; B:106mm; |
| KAWASAKI 705-41-07010 PC Excavator Series Pump | bearing material:Bearing Steel; bearing type:Tapered Roller; radial dynamic load capacity:12300 lb; D:9.5000 in; maximum rpm:5181 RPM; d:2.7500 in; mounting:Two-Bolt Base; radial static load capacity:61200 lb; manufacturer upc number:053893593876; B:4.5000 in; |
| KAWASAKI 705-52-31210 PC Excavator Series Pump | overall depth:4-1/8 in; expansion type:Expansion Bearing &#; d:2 in; seal type:Clearance/Non-C; lubrication type:Lubrication Fitting; bore type:Round; B:5.8750 in; radial dynamic load capacity:27200 lbf; overall height:5-7/8 in; bearing type:Spherical Roller; |
| KAWASAKI 705-41-07500 PC Excavator Series Pump | d:1.375 Inch; Clearance:Standard; Availability:In Stock; B:0.4375 Inch; D:2.5 Inch; Weight:0.20 KGS; SKU:klnj1.3/8-rhp; Seals or Shields:Open Type; |
| KAWASAKI 705-56-33050 PC Excavator Series Pump | manufacturer upc number:662864874229; mounting type:Two-Bolt Flange; housing material:Cast Iron; series:200; duty type:Standard Duty; d:0.7500 in; |
| KAWASAKI 705-52-31070 PC Excavator Series Pump | base width:2.8750 in; D:8.5 to 10.3750 in; bore type:Round; base to bore centerline:3.2500 in; manufacturer catalog number:552978; overall length:12.0000 in; mounting:Two-Bolt Base; B:3.3125 in; lubrication type:Lubrication Fitting; series:EDPBA; |
| KAWASAKI 705-41-01920 PC Excavator Series Pump | Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; J min.:244.475 mm; da:65 mm; P90°:49.8 kN; N1:22.225 mm; dc:61.913 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Stabilizing ring:SR-16-13; P180°:31.6 kN; |
| KAWASAKI 708-3S-04531 PC Excavator Series Pump | mounting:Two-Bolt Base; d:1.9375 in; maximum rpm:3550 RPM; bore type:Round; base to bore centerline:2.2500 in; radial dynamic load capacity:7889 lb; series:NP; finish/coating:Uncoated; locking device:Set Screw; D:6 to 6-1/2 in; |
| KAWASAKI 704-24-26401 PC Excavator Series Pump | radial static load capacity:1080 lbf; d:15 mm; replacement bearing:MU002; duty type:Light Duty; seal type:Contact Seal; radial dynamic load capacity:2150 lbf; series:MUFL000C; end type:Open; housing material:ZDC Alloy with Elect; length through bore:0.866 in; |
| KAWASAKI 705-51-30170 PC Excavator Series Pump | radial static load capacity:27400 lbf; snap ring included:With Snap Ring; series:5300-M; closure type:Open; D:120 mm; contact angle:30 °; cage material:Steel; row type & fill slot:Double-Row Filling S; radial dynamic load capacity:26800 lbf; manufacturer catalog:Click here; |