| KAWASAKI 705-56-34360 PC Excavator Series Pump | Mass bushing:0.59 kg; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; d:60 mm; Tolerance shaft:h8; Tolerance housing:H7; Coefficient of friction µ min.:0.05; D:75 mm; |
| KAWASAKI 705-56-24030 PC Excavator Series Pump | D:6.0156 in; bore type:Round; radial dynamic load capacity:46800 lb; bearing type:Spherical Roller; standards met:ANSI/ABMA STD 9; maximum rpm:1700 RPM; radial static load capacity:55700 lb; finish/coating:Powder Coated; seal type:Contact/Lip; locking device:Double Concentric Co; |
| KAWASAKI 705-51-32040 PC Excavator Series Pump | lubrication hole type:Lubrication Hole; series:IR; width:14 mm; closure type:N/A; d:10 mm; type of needle bearing:Inner Ring; D:14 mm; material:Chrome Steel; |
| KAWASAKI 705-41-07500 PC Excavator Series Pump | d:1.375 Inch; Clearance:Standard; Availability:In Stock; B:0.4375 Inch; D:2.5 Inch; Weight:0.20 KGS; SKU:klnj1.3/8-rhp; Seals or Shields:Open Type; |
| KAWASAKI 705-41-02700 PC Excavator Series Pump | head diameter:* 1.312; race material:PTFE Composite; shank thread size:1/2-20; length to ball center:2.438 in; rod end type:Male Threaded; ball material:Alloy Steel Heat Tre; misalignment angle:12 °; radial static load capacity:6430 lbs; grade:Commercial; thread direction:Left Hand; |
| KAWASAKI 705-56-23010 PC Excavator Series Pump | dynamic load capacity:26507; series:5300; static load capacity:17837 lbs; bore type:Round; maximum rpm:10000 RPM; B:1.0000 in; finish/coating:Uncoated; Weight:0.82 lb; cage material:Carbon Steel; operating temperature range:120° to 248°; |
| KAWASAKI 705-51-30170 PC Excavator Series Pump | radial static load capacity:27400 lbf; snap ring included:With Snap Ring; series:5300-M; closure type:Open; D:120 mm; contact angle:30 °; cage material:Steel; row type & fill slot:Double-Row Filling S; radial dynamic load capacity:26800 lbf; manufacturer catalog:Click here; |
| KAWASAKI 705-58-34010 PC Excavator Series Pump | series:VFCB; seal type:Single Lip Contact w; inner ring width:1.7500 in; replacement bearing:VB-222; locking device:BOA Concentric; d:1.3750 in; B:5.0000 in; bolt size:0.3750 in; manufacturer catalog:Click here; mounting type:Four-Bolt Flange; |
| KAWASAKI 705-55-23020 PC Excavator Series Pump | row type & fill slot:Double-Row Filling S; |
| KAWASAKI 708-3T-04610 PC Excavator Series Pump | B:195 mm; radial dynamic load capacity:11700 lbf; seal type:Double Lip; d:60 mm; lubrication type:Lubrication Fitting; bolt circle diameter:6.3125 in; bore type:Round; radial static load capacity:8100 lbf; series:RMEY; standards met:ASTM A48 Class 30; |
| KAWASAKI 704-24-28200 PC Excavator Series Pump | D:9-7/8 to 11 in; maximum rpm:1700 RPM; finish/coating:Powder Coated; bore type:Round; radial dynamic load capacity:46800 lb; base width:3-1/2 in; housing construction:Solid Pillow Block; housing material:Cast Iron; series:6000; locking device:Adapter Mount; |
| KAWASAKI 704-23-30601 PC Excavator Series Pump | overall height:4.13 in; housing material:Cast Iron; finish/coating:Uncoated; compatible frame number:NS308; dynamic load capacity:4368 lb; overall length:4.31 in; manufacturer catalog number:131191; lubrication type:Lubrication Fitting; unit type:Side Mount; locking device:Set Screw; |