| KAWASAKI 705-22-40070 PC Excavator Series Pump | H1:82.55 mm; P180°:17.8 kN; Labyrinth ring (dc shaft position):LER 27; Pa:11.6 kN; Cap bolt:2 x 1/2-13 UNC; R1:44.45 mm; PG:1/8 NPT; H2:30.163 mm; Housing:SAF 311; Lock washer:W 11; |
| KAWASAKI 705-56-34290 PC Excavator Series Pump | Clearance:C2; Cage Type:Steel; SKU:23056-e1-c2-fag; Limiting Speed Rating (r/min):1960; d:280mm; Seals or Shields:Open Type; Weight:0.02 KGS; Reference Speed Rating (r/min):1100; D:420mm; B:106mm; |
| KAWASAKI 705-45-01320 PC Excavator Series Pump | Basic dynamic load rating C:5940 kN; Basic static load rating C0:17000 kN; r3,4 min.:3.3 mm; B:342.9 mm; Thrust factor K:1.36; d:584.2 mm; Calculation factor Y0:1.6; d1 ≈:601 mm; D1 ≈:678 mm; Design variant/feature:TQO/GWI; |
| KAWASAKI 704-24-26400 PC Excavator Series Pump | inner ring width:3-1/8 in; bearing type:Spherical Roller; seal type:Contact/Lip; expansion type:Non-Expansion Bearin; maximum rpm:2350 RPM; housing material:Steel; radial static load capacity:28700 lb; finish/coating:Uncoated; d:1-3/4 in; D:3.636 in; |
| KAWASAKI 704-24-24430 PC Excavator Series Pump | thrust application warning:This product can not; closure type:Open; D:85 mm; row type & fill slot:Single Row Filling S; snap ring included:Without Snap Ring; bore type:Round; internal clearance:C0; d:45 mm; B:19 mm; fillet radius:1 mm; |
| KAWASAKI 705-56-24030 PC Excavator Series Pump | D:6.0156 in; bore type:Round; radial dynamic load capacity:46800 lb; bearing type:Spherical Roller; standards met:ANSI/ABMA STD 9; maximum rpm:1700 RPM; radial static load capacity:55700 lb; finish/coating:Powder Coated; seal type:Contact/Lip; locking device:Double Concentric Co; |
| KAWASAKI 708-3T-04620 PC Excavator Series Pump | B:1.1860 in; D:3.9370 in; maximum rpm:5800 RPM; outer ring width:1.1860 in; manufacturer upc number:662864003414; d:2.0000 in; manufacturer product page:Click here; bore type:Round; fillet radius:0.0800 in; series:200; |
| KAWASAKI 705-56-23010 PC Excavator Series Pump | dynamic load capacity:26507; series:5300; static load capacity:17837 lbs; bore type:Round; maximum rpm:10000 RPM; B:1.0000 in; finish/coating:Uncoated; Weight:0.82 lb; cage material:Carbon Steel; operating temperature range:120° to 248°; |
| KAWASAKI 705-12-30010 PC Excavator Series Pump | bore type:Tapered 1:12; precision rating:Not Rated; outer ring width:43 mm; application:Vibratory Applicatio; outer ring type:Not Split; maximum rpm:4500 RPM; d:90 mm; bearing material:Steel; operating temperature range:Maximum of +120; internal clearance:C0; |
| KAWASAKI 705-56-34490 PC Excavator Series Pump | housing size:SAF 532;SAFS 53; d:5.5000 in; lock nut number:AN 32; series:SNW; lock washer number:W 32; material / coating:Steel; taper:1:12; compatible bearing number:22232 CCK/W33; manufacturer upc number:087796146471; |
| KAWASAKI 705-41-07060 PC Excavator Series Pump | bore type:Round; D:225 mm; precision rating:ABEC 1; cage material:Steel; manufacturer upc number:053893722580; B:35 mm; internal clearance:C0; d:150 mm; closure type:Two Contact Seals; |
| KAWASAKI 705-55-23040 PC Excavator Series Pump | Seals or Shields:Open Type; Static Load Rating (kN):5060; Clearance:C3; Limiting Speed Rating (r/min):510; Reference Speed Rating (r/min):540; SKU:24156kembw33w45ac3-t; D:460mm; Weight:118.00 KGS; Dynamic Load Rating (kN):3210; Cage Type:Brass; |