| KAWASAKI 07449-66500 HD Series Pump | L:1220 mm; P180°:4000 kN; J1:260 mm; H2:135 mm; Appropriate attachment bolt, size G:42 mm; Q180°:2900 kN; Bearing (basic designation):23188 K; P150°:3100 kN; Adapter sleeve:OH 3188 H; Q120°:5800 kN; |
| KAWASAKI 705-12-44040 HD Series Pump | d:105.000 mm; Fillet Radius ra:3.00 mm; B:65.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:2900 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:290.0000 mm; Sealed Speed Rating n3:1600 rpm; Basic Static Radial Load Rating Co:228000 N; Basic Dynamic Radial Load Rating C:247000 N; |
| KAWASAKI 07435-67101 HD Series Pump | D:150 mm; Preload class C GC:1240 N; Static axial stiffness, preload class D:312 N/µm; Calculation factor f1:1; d:100 mm; Basic dynamic load rating C:83.2 kN; r1,2 min.:1.5 mm; d1:115.4 mm; db min.:107 mm; B:24 mm; |
| KAWASAKI 705-52-42220 HD Series Pump | d:65.000 mm; B:23.00 mm; Oil Speed Rating n2:6000 rpm; Basic Static Radial Load Rating Co:51000 N; Grease Speed Rating n1:4500 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Fillet Radius ra:1.50 mm; |
| KAWASAKI 705-22-44070 HD Series Pump | Mass pillow block:217 kg; Adapter sleeve assembly:SNW 38x6.7/8; S:4.763 mm; Cap bolt recommended tightening torque:1735.4 N·m; P180°:160 kN; H1:200.025 mm; Cap bolt, SAE grade:8; Pa:52.5 kN; Bearing:22238 CCK/W33; A1:190.5 mm; |
| KAWASAKI 705-56-34630 HD Series Pump | Mass bearing unit:1.1 kg; Hexagonal key size for grub screw N:4 mm; A5:20 mm; Fatigue load limit Pu:0.475 kN; Housing:SY 506 M/VZ033; H:82 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Thread grub screw G2:M8x1; H1:42.9 mm; N:23.5 mm; |
| KAWASAKI 705-11-38110 HD Series Pump | A1:158.75 mm; dc:146.05 mm; J min.:431.8 mm; Pa:62.3 kN; Cap bolt:4 x 3/4-10 UNC; H1:160.325 mm; P150°:80.1 kN; H:320.675 mm; Initial grease fill:623.7 g; Bearing:22230 CC/W33; |
| KAWASAKI 705-52-32001 HD Series Pump | d1:150 mm; r1,2 min.:1.1 mm; B:11.5 mm; Mass shaft washer:0.86 kg; d:100 mm; |
| KAWASAKI 705-12-38010 HD Series Pump | Stabilizing ring:2 x SR-1616; Appropriate attachment bolt size G:0.75 in; P120°:32 kN; J min.:269.875 mm; Cap bolt:2 x 3/4-10 UNC; End plug (suffix Y):EPR 8; PosiTrac Plus contact element:2 x B10724-44; R1:63.5 mm; Cap bolt, SAE grade:8; P90°:51.6 kN; |
| KAWASAKI 07445-66400 HD Series Pump | Basic Static Radial Load Rating Co:8300 N; d:20.000 mm; B:14.00 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:12500 N; Grease Speed Rating Open/Shielded n1:12000 rpm; Oil Speed Rating Open/Shielded n2:15000 rpm; D:47.0000 mm; |
| KAWASAKI 705-21-36060 HD Series Pump | Tolerance housing:H7; Specific static load factor K0:20 N/mm²; D:21 mm; B:25 mm; Coefficient of friction µ min.:0.05; B1:3 mm; Permissible sliding velocity v min.:0.25 m/s; D1:27 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; |
| KAWASAKI 705-52-31250 HD Series Pump | Basic Dynamic Radial Load Rating C:114000 N; Fillet Radius rb:1.00 mm; B:30.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:114000 N; D:175.0000 mm; d:110.000 mm; Oil Speed Rating n2:4400 rpm; |