| KAWASAKI 705-56-36040 WA Series Pump | l7 min.:20 mm; Material constant KM:330; G:M 12x1.25; α:10 °; C1 max.:11 mm; N max.:45 mm; N1 max.:13 mm; Tightening torque bolt with internal hexagon:10 N·m; Mass rod end:0.25 kg; Basic dynamic load rating C:21.2 kN; |
| KAWASAKI 705-52-30360 WA Series Pump | Cap bolt:1 1/4-7 UNC; da:182.563 mm; S:4.763 mm; L:749.3 mm; Max. speed for PosiTrac Plus seal:800 r/min; Pa:58.7 kN; P90°:334 kN; Cap bolt recommended tightening torque:2467.6 N·m; H:419.1 mm; Initial grease fill:2154.6 g; |
| KAWASAKI 705-52-31130 WA Series Pump | Basic dynamic load rating C:1790 kN; Limiting speed:700 r/min; B:118 mm; b1:9.4 mm; Da max.:445 mm; Reference speed:560 r/min; r1,2 min.:3 mm; ra max.:2.5 mm; Calculation factor kr:0.25; Mass bearing:57.8 kg; |
| KAWASAKI 705-11-33100 WA Series Pump | X-L-O Part Number:67-107; Grease Speed Rating Max. n1:16000 rpm; Keyway f:3.2 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Max. n2:20000 rpm; d:31.750 mm; Preload:0 lb; B:31.75 mm; Oil Mist Speed Rating Max. n3:35000 rpm; D:61.9100 mm; |
| KAWASAKI 705-51-30820 WA Series Pump | Accessories:Two Shields & Snap-R; D:130.0000 mm; d:75.000 mm; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:137000 N; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; |
| KAWASAKI 705-56-36082 WA Series Pump | Coefficient of friction µ min.:0.02; Coefficient of friction µ max.:0.2; Specific dynamic load factor K:120 N/mm²; Permissible sliding velocity v min.:0 m/s; B:100 mm; H:1 mm; Permissible sliding velocity v max.:2.5 m/s; Mass strip:0.14 kg; L:500 mm; Specific static load factor K0:250 N/mm²; |
| KAWASAKI 705-52-30280 WA Series Pump | Mass shaft washer:0.35 kg; d1:135 mm; d:100 mm; r1,2 min.:1 mm; B:7 mm; |
| KAWASAKI 705-11-35010 WA Series Pump | Basic dynamic load rating C:9.52 kN; Radial shaft seal with a low cross-sectional height, single lip:G 12x18x3; Basic static load rating C0:15.3 kN; r min.:0.8 mm; Reference speed:13000 r/min; D:18 mm; Fatigue load limit Pu:1.76 kN; Mass bearing:0.011 kg; Fw:12 mm; Inner ring IR series:IR 8x12x12.5; |
| KAWASAKI 705-51-30590 WA Series Pump | Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance housing:H7; D:70 mm; Mass bushing:0.64 kg; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; |
| KAWASAKI 705-52-30490 WA Series Pump | B:17 mm; d:25 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.027 kg; F:30 mm; |
| KAWASAKI 705-52-30080 WA Series Pump | D:47.0000 mm; Fillet Radius rb:0.15 mm; Oil Speed Rating n2:17000 rpm; Fillet Radius ra:0.30 mm; Grease Speed Rating n1:14000 rpm; d:30.000 mm; B:9.00 mm; Basic Dynamic Radial Load Rating C:9750 N; Basic Static Radial Load Rating Co:7100 N; |
| KAWASAKI 705-51-20290 WA Series Pump | Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:70200 N; Basic Static Radial Load Rating Co:85000 N; d:75.000 mm; D:115.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:5400 rpm; Grease Speed Rating n1:4500 rpm; B:40.00 mm; |