| KAWASAKI 705-40-01020 WA Series Pump | R1:120.65 mm; Labyrinth ring:2 x LOR 167; PosiTrac Plus contact element:2 x B10724-167; R2:42.069 mm; P90°:249 kN; Cap bolt, SAE grade:8; Cap bolt:1 1/8-7 UNC; Initial grease fill:1672.65 g; Stabilizing ring:2 x 36053-140; Bearing:23044 CCK/W33; |
| KAWASAKI 705-51-30580 WA Series Pump | r2 min.:1 mm; d:70 mm; M:4 mm; r1 min.:1 mm; Specific static load factor K0:500 N/mm²; dk:105 mm; da min.:77.5 mm; Da max.:113.8 mm; α:16 °; rb max.:1 mm; |
| KAWASAKI 705-52-20100 WA Series Pump | J min.:206.375 mm; RG:1/4 NPT; R2:25.4 mm; Bearing:1311 EKTN9; P180°:17.8 kN; ba:29.369 mm; Mass pillow block:12.4 kg; P60°:43.1 kN; da:47.625 mm; PG:1/8 NPT; |
| KAWASAKI 705-52-30580 WA Series Pump | Basic Dynamic Radial Load Rating C:78100 N; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating Open/Shielded n2:5900 rpm; d:45.000 mm; B:29.00 mm; D:120.0000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Static Radial Load Rating Co:61000 N; |
| KAWASAKI 705-53-42000 WA Series Pump | Basic dynamic load rating C:6.05 kN; Static axial stiffness, preload class B:29 N/µm; Calculation factor fHC:1; Calculation factor f2C:1.09; d2:25.6 mm; Fatigue load limit Pu:0.137 kN; Calculation factor f2A:1; Calculation factor f1:1; Calculation factor f2D:1.15; Preload class D GD:200 N; |
| KAWASAKI 705-52-30280 WA Series Pump | Ba min.:2 mm; Da max.:460 mm; db min.:278 mm; Calculation factor Y0:1.8; r1,2 min.:5 mm; Basic dynamic load rating C:3395 kN; K:12 mm; Calculation factor Y2:2.9; d3:330 mm; D:480 mm; |
| KAWASAKI 705-73-30010 WA Series Pump | d:40 mm; α:7 °; Basic static load rating C0:140 kN; Material constant KM:330; Basic dynamic load rating C:100 kN; dk:53 mm; C1 max.:24 mm; Specific dynamic load factor K:100 N/mm²; G:M 42x3; r1 min.:0.6 mm; |
| KAWASAKI 705-51-30820 WA Series Pump | Accessories:Two Shields & Snap-R; D:130.0000 mm; d:75.000 mm; B:41.30 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:137000 N; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:108000 N; |
| KAWASAKI 705-55-34190 WA Series Pump | Cap bolt recommended tightening torque:81.3 N·m; h:31.75 mm; R2:15.875 mm; Pa:3.47 kN; PG:1/8 NPT; N1:19.05 mm; RG:1/8 NPT; Contact seal:2 x B9784-19; A2:98.425 mm; R1:34.131 mm; |
| KAWASAKI 705-73-29010 WA Series Pump | Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; d:35.000 mm; D:80.0000 mm; B:38.10 mm; Oil Speed Rating n2:7500 rpm; Basic Static Radial Load Rating Co:48000 N; Basic Dynamic Radial Load Rating C:52300 N; Grease Speed Rating n1:5600 rpm; Accessories:No Shield, no Seal,; |
| KAWASAKI 705-11-30210 WA Series Pump | Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:125000 N; Basic Static Radial Load Rating Co:41500 N; Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:4500 rpm; d:60.000 mm; B:42.00 mm; D:150.0000 mm; |
| KAWASAKI 705-11-35010 WA Series Pump | Basic dynamic load rating C:9.52 kN; Radial shaft seal with a low cross-sectional height, single lip:G 12x18x3; Basic static load rating C0:15.3 kN; r min.:0.8 mm; Reference speed:13000 r/min; D:18 mm; Fatigue load limit Pu:1.76 kN; Mass bearing:0.011 kg; Fw:12 mm; Inner ring IR series:IR 8x12x12.5; |