| KAWASAKI 385-10079282 WA Series Pump | Material constant KM:330; dk:105 mm; w:90 mm; l3 min.:85 mm; G:M 80; B:55 mm; Basic dynamic load rating C:400 kN; Mass rod end:15 kg; C1 max.:48 mm; l4 max.:389 mm; |
| KAWASAKI 705-55-34180 WA Series Pump | P120°:23.1 kN; Housing:FSAF 517; Max. speed for Taconite seal:1050 r/min; N1:19.05 mm; A2:198.438 mm; J1:53.975 mm; ba:35.719 mm; Cap bolt recommended tightening torque:149.1 N·m; h:34.925 mm; H1:95.25 mm; |
| KAWASAKI 705-11-34011 WA Series Pump | Grease Speed Rating n1:6000 rpm; Accessories:Two Shields; Oil Speed Rating n2:8000 rpm; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; d:35.000 mm; Basic Static Radial Load Rating Co:27500 N; B:27.00 mm; D:72.0000 mm; Sealed Speed Rating n3:6000 rpm; |
| KAWASAKI 705-56-36051 WA Series Pump | B:76.00 mm; Basic Static Radial Load Rating Co:405000 N; Fillet Radius ra:2.00 mm; d:160.000 mm; Grease Speed Rating n1:1900 rpm; Basic Dynamic Radial Load Rating C:286000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2400 rpm; D:240.0000 mm; |
| KAWASAKI 705-40-01041 WA Series Pump | D:22.0000 mm; Sealed Speed Rating n3:23000 rpm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:3250 N; Fillet Radius ra:0.30 mm; d:8.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N; B:7.00 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; |
| KAWASAKI 705-22-44070 WA Series Pump | D1 ≈:934 mm; Basic dynamic load rating C:6100 kN; Misalignment factor k1:0.131; Fatigue load limit Pu:815 kN; Ca min.:2.7 mm; Basic static load rating C0:13400 kN; Da max.:977 mm; da min.:773 mm; da max.:856 mm; Limiting speed:560 r/min; |
| KAWASAKI 705-11-33011 WA Series Pump | D2 ≈:7.9 mm; r1,2 min.:0.15 mm; Calculation factor f0:6.4; Basic static load rating C0:0.095 kN; Limiting speed:70000 r/min; d:3 mm; da min.:3.9 mm; Fatigue load limit Pu:0.004 kN; Calculation factor kr:0.03; Basic dynamic load rating C:0.325 kN; |
| KAWASAKI 705-52-30190 WA Series Pump | Initial grease fill:1304.1 g; P90°:320 kN; Da:319.999 mm; End plug (suffix Y):EPR 19; P60°:535 kN; da:160.338 mm; h:60.325 mm; Mass pillow block:197 kg; Max. speed for Taconite seal:460 r/min; R2:41.275 mm; |
| KAWASAKI 705-56-44001 WA Series Pump | G:M 130x2; Lock nut:KML 26; Hydraulic nut:HMV 26 E; B4:23 mm; d1:114.3 mm; B:21 mm; B1:121 mm; Mass adapter sleeve assembly:4.25 kg; d:130 mm; Locking device:MBL 26; |
| KAWASAKI 705-51-20070 WA Series Pump | d2 max.:104 mm; l7 min.:55 mm; Material constant KM:330; α:7 °; l3 min.:65 mm; d4 ≈:65 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; B:32 mm; Basic static load rating C0:224 kN; |
| KAWASAKI 705-51-32080 WA Series Pump | Basic Static Radial Load Rating Co:35500 N; Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; d:20.000 mm; D:72.0000 mm; Grease Speed Rating n1:9600 rpm; Oil Speed Rating n2:12000 rpm; B:38.00 mm; Basic Dynamic Radial Load Rating C:52700 N; |
| KAWASAKI 705-51-20390 WA Series Pump | Housing material:Cast iron; Thread grub screw G2:1/4-28 UNF; R1:21 mm; J7:19 mm; s1:19.8 mm; Mass bearing unit:0.73 kg; N:11.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Limiting speed:7000 r/min; Basic static load rating C0:7.8 kN; |