| KAWASAKI 705-51-20170 WA Series Pump | Housing:SAF 620; da:85.725 mm; H1:133.35 mm; J1:69.85 mm; P150°:66.7 kN; Cap bolt, SAE grade:8; Initial grease fill:765.45 g; Pa:14 kN; Cap bolt:2 x 1-8 UNC; A1:120.65 mm; |
| KAWASAKI 705-52-30280 WA Series Pump | Mass shaft washer:0.35 kg; d1:135 mm; d:100 mm; r1,2 min.:1 mm; B:7 mm; |
| KAWASAKI 705-11-38000 WA Series Pump | α:6 °; Basic dynamic load rating C:80 kN; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; b:3.9 mm; B:25 mm; da min.:38.5 mm; r2 min.:1 mm; rb max.:1 mm; D:55 mm; |
| KAWASAKI 705-51-20400 WA Series Pump | a:171 mm; d2 ≈:398.15 mm; Calculation factor Y0:0.33; d1 ≈:430.73 mm; D:540 mm; Calculation factor A:6.75; Mass bearing:61.8 kg; D1 ≈:472.8 mm; Da max.:522 mm; |
| KAWASAKI 705-51-20430 WA Series Pump | r3,4 min.:6 mm; d:600 mm; Mass angle ring:27.5 kg; B1:31 mm; B2:55 mm; d1 ≈:695 mm; |
| KAWASAKI 705-52-20190 WA Series Pump | Permissible sliding velocity v max.:0.5 m/s; a:2.5 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; α:124 °; Coefficient of friction µ min.:0.08; h:111.5 mm; B1:8 mm; D1:140 mm; d:110 mm; |
| KAWASAKI 705-52-20240 WA Series Pump | d:340.000 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; Grease Speed Rating Open/Shielded n1:1200 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:178000 N; B:38.00 mm; D:420.0000 mm; Accessories:Two Shields; Sealed Speed Rating n3:0 rpm; Basic Static Radial Load Rating Co:255000 N; |
| KAWASAKI 705-55-43040 WA Series Pump | Number of attachment bolts:11; H:28 mm; Static moment stiffness:290 N·m/mrad; Basic dynamic load rating C:31 kN; Attainable speed:4900 r/min; H1:19 mm; Frictional moment:0.25 N·m; r1,2 min.:0.3 mm; Required attachment bolt size (DIN 912):M6; da min.:40 mm; |
| KAWASAKI 705-40-01041 WA Series Pump | D:22.0000 mm; Sealed Speed Rating n3:23000 rpm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:3250 N; Fillet Radius ra:0.30 mm; d:8.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N; B:7.00 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; |
| KAWASAKI 705-22-40110 WA Series Pump | Basic Dynamic Radial Load Rating C:30200 N; B:23.80 mm; Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:7000 rpm; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Oil Speed Rating n2:9500 rpm; |
| KAWASAKI 705-12-38011 WA Series Pump | Basic static load rating C0:21.6 kN; Recommended diameter for attachment bolts, mm G:14 mm; B4:8 mm; Thread grub screw G2:5/16-24 UNF; Housing:FYTB 509 M/VZ033; Recommended tightening torque for grub screw:6.5 N·m; T:54.2 mm; s1:30.2 mm; Db1:102 mm; J:148.5 mm; |
| KAWASAKI 705-51-20440 WA Series Pump | Cap bolt, SAE grade:8; P150°:40 kN; RG:3/8 NPT; H1:114.3 mm; PG:1/4 NPT; H:222.25 mm; Pa:18.1 kN; R1:65.088 mm; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |